FUSO news

News from 05/04/2017
Body mounting directives Update

Dear Bodybuilders,

In this newsletter we would like to make you aware of an update in our body mounting directives.

Please see further information in the BB-Info 06_2017 "Body mounting directives...

News from 27/03/2017
Initial commissioning of FUSO Canter one-invoice vehicles of Bodybuilders / start of warranty period

Dear Bodybuilders,

We would like to inform you about the initial commissioning of FUSO Canter one-invoice vehicles of Bodybuilders.

Please see further information in the BB-Info 05_2017 "Initial...

News from 24/03/2017
Change of tires FUSO Canter, all vehicles - Single fitment for FUSO Canter 4x4

Dear Bodybuilders,

Currently we are receiving various requests regarding a change of tires of the Canter 4x4 (FGB71ER6SEU4; FGB71GR6SEU4) to a single fitment at all driven axles.

Please see further...

News from 14/02/2017
Registration of box bodies 2600 mm according to ECE-R 48 is possible again

Dear Bodybuilders,

we would like to inform you about the current state to box bodies with a total vehicle width of 2600 mm.

Please see further information in the BB-Info 03_2017 "Registration of...

News from 04/01/2017
Introduction of online quality management system for FUSO one-invoice vehicles

Dear Bodybuilders and Business partners,

we would like to inform you about the introduction of online quality management system AQFO for FUSO one-invoice vehicles.

Please see further information in...

News from 03/01/2017
Important information for box bodies

Dear Bodybuilders,

we would like to inform you about the following technical information relate to box bodies with a total vehicle width of 2600 mm.

Please see further information in the BB-Info...

News from 16/12/2016
New team in the Bodybuilder Management FUSO Europe

Dear Bodybuilders,

we would like to inform you about the new team in the Bodybuilder Management FUSO Europe.

Please see further information in the ABH-Info 12_2016 "New team in the Bodybuilder...

News from 31/05/2016
Quotations drawings for Canter TF1 OBD Euro VI online

Dear Bodybuilders,

Top/side quotation drawings for the new Canter TF1 OBD Euro VI are now available to you since 30 May 2016.

Please find them in the tab “TECHNICAL INFORMATION” by selecting...

News from 10/12/2015
Cooperation at IAA 2016

Dear Bodybuilders,

in this newsletter we would like to inform you about our campaign “Funding of Bodybuilder activities at IAA 2016”.

Please see further information in the BB-Info 06_2015...

News from 29/10/2015
Release PTO oil cooler for continuous use over 4 hours

Dear Bodybuilders,

in this newsletter we would like to inform you about the manufacturer certification for the installation of a transmission oil cooler, which allows the usage of our factory PTOs...

News from 13/08/2015
Accessories & Retrofits

Dear Bodybuilders,

In this newsletter we would like to inform you about our original FUSO Accessories and Retrofits.

Please see further information in the BB-Info 04_2015 " Accessories &...

News from 06/07/2015
Technical Information: Lane Departure Warning system as standard

Dear Bodybuilders,

In this newsletter we would like to inform you about the introduction of a Lane Departure Warning System for Canter 6S, 7C, 9C as of 01.07.2015.

Please see further information...

News from 29/06/2015
New seat colour and new floor covering

Dear Bodybuilders,

In this newsletter we would like to inform you about two product changes. There will be a new seat colour and new floor covering which will be implemented on the Canter TF1 as...

News from 06/02/2015
Technical information: Repositioning of the AdBlue tank

Dear Bodybuilders,

In this newsletter we would like to inform you about the possibility for a subsequent repositioning of the AdBlue tank on all Canter models with AdBlue system.

Please see...

News from 11/12/2014
Technical information: Downgrading of all 7,5t Canter models to 7,49t (toll-free!)

Dear Bodybuilders,

in this newsletter we would like to inform you about the new homologated vehicle weights of all Canter 7C models backdated to the 1st of December 2014.

Please see further...

News from 04/12/2014
Changes in the Bodybuilder Engineering function

Dear Bodybuilders,

in this newsletter we would like to inform you about structural and personnel changes in our Bodybuilder Engineering Team.

Please see further information in the BB-Info 08_2014...

News from 21/11/2014
Technical information: Trailer weight increase Canter 6S

Dear Bodybuilders,

this newsletter informs you about the technical possibility to increase the trailer weight on the FUSO Canter 6S.

Please see further information in the BB-Info 07_2014...

News from 07/11/2014
Sales campaign: Retrofitting Power Take Off and cab back engine control

Dear Bodybuilders,

this newsletter informs you about a sales campaign for the retrofit of PTOs and the cab back engine.

Please see further information in the BB-Info 06_2014 "Sales campaign:...

News from 21/10/2014
Technical information: Access to the emergency switch on the FUSO Canter Eco-Hybrid

Dear Bodybuilders,

this newsletter informs you about the need of free access to the emergency switch of the FUSO Canter Eco-Hybrid.

Please see further information in the BB-Info 05_2014...

News from 10/09/2014
Technical information Canter TF1 regarding Airbag deactivation for vehicles with front attachments

Dear Bodybuilders

this newsletter informs you about the airbag deactivation for vehicles with front attachments.

Please see further information in the BB-Info 04_2014 "Airbag...

News from 07/08/2014
FUSO Canter at the IAA 2014

Dear Bodybuilders,

this newsletter informs you about the FUSO Canter at the IAA 2014 in Hannover.

Please see further information in the BB-Info 03_2014 "IAA information".

FUSO - A...

News from 07/08/2014
Technical information Canter TF1 regarding Cab Back Controller Code DT/VA6

Dear Bodybuilders,

this newsletter informs you about the new parameterization for vehicles with Cab Back Controller Code DT/VA6 ex. factory.

Please see further information in the BB-Info 02_2014...

News from 12/03/2014
Technical information Canter TF1 for connection of consumers to the 24V equalizer option DD / EJ9

Dear Bodybuilders,

the following newsletter provides you the further instructions regarding handling and installation of consumers to the 24 V equalizer (Code DD/EJ9) under consideration of the...

News from 05/12/2013
New FUSO Canter 9C15 / 9C18 Euro VI with GVW 8.55 t

Dear Bodybuilders,

This newsletter introduces the newest member of the Canter family to you, the 9C15 / 9C18 Euro VI with 8.55t gross vehicle weight.

Please see further information in the BB-Info...

News from 08/11/2013
New FUSO Canter TF1 now with Euro 5b+ and VI

Dear Bodybuilders,

This newsletter informs you about the product innovation. In the upcoming year 2014 the FUSO Canter is switched over to the European exhaust emission regulations valid from 1st...

News from 02/08/2013
Pre - Information: FUSO Canter TF1 (Euro 5b+ & Euro VI) with partially changed body mounting bracket positions

Dear Bodybuilders,

This newsletter informs you in advance about the relevant product changes to the new FUSO Canter TF1, which will be produced from the end of September in Tramagal...

News from 26/06/2013
End of production of the Mercedes-Benz Vario: FUSO Canter - the alternative within the Daimler Group

Dear Bodybuilders,

This newsletter informs you about the end of production of the Mercedes-Benz Vario and the body mounting possibilities of the FUSO Canter as follower.

Please see further...

News from 22/05/2013
Award-winning Bestseller: FUSO Canter Truck celebrates 50th Anniversary.

Dear Bodybuilders,

This newsletter informs you about the story of success of FUSO Canter on his 50th birthday.

Please see further information in the BB-Info 05_2013 "Award-winning Bestseller:...

News from 11/03/2013
Option NQ8 "High-power PTO with flange"

Dear Bodybuilders,

This newsletter provides you with information on the option NQ8 "High-power PTO (62 kW) with flange", now available for all 7.5t models (except Eco Hybrid).

Please...

News from 27/02/2013
New option ED/EX5 trailer socket

Dear Bodybuilders,

This newsletter provides you with information on the newly available option ED/EX5 "Trailer socket + omission of underride guard".

Please refer toBodybuilder...

News from 06/02/2013
7C18D crewcab and 4750 mm wheelbase

Dear Bodybuilders,

The purpose of this newsletter is to inform you of the extension of the Canter TF product range. The Canter TF 7C18D crewcab model with 4750 mm wheelbase is available to order...

News from 31/01/2013
Canter TF 3C as crewcab

Dear Bodybuilders,

The purpose of this newsletter is to inform you about the new 3.5t Canter TF crewcab model, which is available to order now in the variants 3C13D, 3C15D and 3C15D DUONIC.

Please...

News from 27/11/2012
New special equipment EH/VB5 extended exterior mirror arm with wide-angle mirror

Dear Bodybuilders,

The purpose of this newsletter is to inform you of the new item of special equipment EH/VB5 "Extended exterior mirror arm with wide-angle mirror", which is now available...

News from 27/11/2012
Working on the new Canter Eco Hybrid

Following on from the impressive debut of the new Canter Eco Hybrid at this year's IAA International Commercial Vehicle Show in Hanover and its successful European market launch, we would like to...

News from 14/09/2012
FUSO Canter at the IAA 2012

At the 2012 IAA International Commercial Vehicle Show, the FUSO Canter family is showing itself to be more versatile, powerful and comfortable than ever. In the Daimler hall 14/15, we are exhibiting...

News from 02/08/2012
New FUSO Canter Eco Hybrid: "Green light for efficiency"

It's the latest chapter in the success story of the Canter Eco Hybrid: production of the new model in Tramagal/Portugal and its launch on the European market are set to begin in the third quarter of...

News from 31/07/2012
Information on bodybuilder electrical interfaces on Canter TF

Dear Bodybuilders,

The following newsletter provides you with further information on the electrical interfaces on the new Canter TF.

Bodybuilder Information 04 2012

Your FUSO Bodybuilder...

News from 18/05/2012
Body information for the new Canter 6C18 4x4

Dear Bodybuilders,

The following newsletter provides you with further information on mounting bodies on the new Canter 6C18 4x4.

The following documentation on the new Canter 4x4 has been available...

News from 13/04/2012
The new Canter 4x4 from FUSO!

Dear Bodybuilders,

The arrival of a completely overhauled Fuso Canter marked the launch of the new generation of the truck in October 2011. Now, the all-wheel-drive variant is also set to make its...

News from 23/01/2012
New electrical networking in the new Canter TF

Dear Bodybuilders,

The following Bodybuilder Information bulletin provides you with information on carrying out adjustments to electrical control units (ECU) following vehicle modifications in...

News from 17/10/2011
The new Canter from Fuso: now even more economical, functional and comfortable

- Duonic – fully automated dual-clutch transmission, available in a truck for the first time

- Start/stop function reduces fuel consumption

- Independent front suspension

- New cockpit offers even...

News from 15/09/2010
FUSO Bodybuilder Portal online

Dear Bodybuilders,The new FUSO Bodybuilder Portal is going online to coincide with the 2010 IAA International Commercial Vehicle Show in Hanover. Apart from product information on the compact truck...

User login

Enter your username and password to log on to the website:
Username
Password
Log in
 
 

Use of cookies

Daimler uses cookies to optimize the design of this website and make continuous improvements. By continuing your visit the website, you consent to the use of cookies.

Further details can be found in 'Cookies'.

Close